Powder Coating Oklahoma

Professional Powder Coating Oklahoma

Precision Metal Forming provides professional powder coating throughout Oklahoma. Our professional powder coating processes are done locally at our Oklahoma City location. We utilize technology that will provide the most durable finish for metal substrates.

Our powder coating provides the best outstanding protective finish that withstands exposure to the elements of weather, chemicals and a variety of abuse. We also offer a wide variety of choices:  COLORS, TEXTURES, and SHEENS.

powder coating oklahoma

Highest Quality Powder Coating

All of our powder coating projects utilize the highest quality powders, to ensure the project is durable and a long-lasting finish. We ensure all projects are done to the highest standards by using the top powder manufacturers in the industry. We also perform a wide variety of tests to insure our consistent quality.

The Powder Coating Process

Step 1:

We start the powder coating process on our conveyor belt with a five-stage pre-treatment system.

Step 2:

Products are painted and placed in an oven where the powder is baked.

Step 3:

Once the baking process is completed, your product will have a durable finish with a reduced risk of chipping and fading.

powder coating oklahoma

Locally Owned and Operated in Oklahoma City

Family owned and operated, Precision Metal Forming, LLC is centrally located in Oklahoma City, Oklahoma.

Fluidized Sand Bed Stripping

Fluidized sand bed stripping is a method in removing cured powder coatings.

The process utilizes an inert media (sand or oxides) that is used as a heat transfer medium.

In sand bed system, natural gas and air are forced through the medium and are ignited at the surface of the medium.  This transfer of heat fluidizes the medium.  The product with the cured powder coatings is then lowered into the tank of fluidized medium at a temperature of approximately 800F.

The medium begins breaking down the powder coating on the the product and the agitation of the fluidized medium removes any ash on the product.  The normal time frame for the product to be in the tank is relatively fast – about 30-60 minutes.

  • Ensures no damage to parts, because the heat is dispersed equally in the tank.
  • Products cleaned in this method require minimal cleaning efforts to be prepared for the recoating process.
  • The fluidized sand bed stripping method is safe and environmentally friendly.
  • No toxic chemicals are used and no hazardous waste is generated.